Each client may have another IP address for Internet service. This means that another IP address is allowed for client´s firewall. The IP address is from the same client range.
These IP addresses are automatically shared on client´s line; it is defined for a superior service.
Number of Other IP addresses is shown in list of active services.
 |
Edit current IP address |
 |
Delete current IP address |
| + Add new IP address for client |
| Description | Description printed on invoice. |
|---|---|
| Connected from | Date of adding new IP address Current date is pre-filled automatically. |
| Invoice from date | Initial date of invoicing the service/item. Usually it is left unchanged (i.e. current date is used), the first invoice is issued at next invoicing. (Invoicing Invoices). If you move the date forward, the first invoice will be issued following this date.
|
| Price | You may fill in monthly fee. |
| No aggregate line | IP address is configured as individual, having the same speed as superior service. If unchecked line is shared with superior service. |
| Client´s MAC adress | MAC address of client´s wlan interface. The system automatically loads MAC addresses once an hour. If you have activated firewall MAC filter and you connect a new client, you do not need to fill in client´s MAC address. In this case, ISPadmin enables the client in firewall and when the client is connected, it will read his MAC address from ARP table, and stores it. IP address is then linked to MAC address and locked. |
| Modem MAC address | Physical address of a bridge. MAC address of end device is to be entered only if a client has HW equipment (CPE) provided by an ISP which works in bridge mode. If MAC address is not entered, the system will try to find it automatically. Every hour, the system checks ARP table of all routers and if IP address is found, it will automatically fill MAC address in, too. Information on detected MAC address is available in Statistics History, MAC addresses. |
| Client's IP address | IP address under which the client is stored in the system, i.e. routerboard wlan interface address (routed network) or wi-fi PCI card address (bridged network). ISPadmin automatically offers the first free IP within address range on a given router. When client´s IP address is filled in, it is then entered into Mikrotik. Failing which IP address from DHCP pool is used by Mikrotik. Framed-IP-Address attribute is created. |
| Note | Note to the service (Active services), please distinguish from client note in Client card. |
You may use Internet system variable